三轴数字加速度计

三轴数字加速度计7152-N-VER.1是为线性加速度和振动加速度测量设计的数字三轴加速度传感器,可给出三个垂直面的加速度变量。
三轴数字加速度计自重仅仅1.5g,自身重量对加速度的影响可忽略不计,尺寸为8.5x8.5x8.5mm,结构紧凑,适合空间狭小的区域安装使用。
三轴数字加速度计you点
不需要调试
测量结果以数字式传输
测量范围高达200G
高精度和可靠性

三轴数字加速度计规格参数

Instant values measurements: Specifications
Measurement range (to be set in the software)	±2 g (±18 m/s2) ±8 g (±70 m/s2)
Output at 0 g	±25 mg
Frequency range	from DC up to  800 Hz
Measurements tolerance (non-linearity, intrinsic noise)	6 % FSO
Offset 0 g, additional (caused by temperature fluctuations)	±0,2 mg/10°C
Measurements tolerance (caused by temperature fluctuations)	± 0,1 % FSO/10°C
Interaxial sensitivity	1 %
Sampling rate*	250, 2500 Hz
Technical specifications
Data transfer interface	CAN 2.0
Exchange speed	100, 300, 1000 kbit/s
Perfomance monitoring in real-time mode	Synchronization quality, data quality
Measurements reliability control	Sensing element integrity control
Operational specifications
Device power	9 – 24 V
Power consumption	0,5 W
Reverse polarity protection	yes
Dimensions	140×56×28 mm
Weight	300 g
Operation temperature range	from  -40 up to  +80 °C
Available product versions	Standard (steel package) Explosion-proof** (explosion safety of 0ExiaIICT6 X type) OEM (compound coating)
Electromagnetic compatibility EMC
IEC 61000-4-2, ESD	contact 8 kV; air 15 kV
IEC 61000-4-4, EFT	power supply 4 kV; signal 2 kV
IEC 61000-4-5, Surge	4000 V

* Data compression algorithm – delta-coding with the posiibility of  flexible data traffic distribution between the CAN-network transducers
** The cost is calculated on individual basis