这款
多通道频谱分析仪017-U32可并行操作多个程序,多个信号分析,频谱分析仪配套各种软件和硬件,组成整套系统用于振动,声学,力学诊断,测试设备控制,支持用户研发成多任务硬件系统,适合测试,处理和监控应用。
多通道频谱分析仪017-U32可独立使用,也可用于自动控制系统中,用于科研和工业控制。与我们配套的控制软件联合使用后可具有如下功能:
实时信号分析,分析先前记录的信号
基于并行数字滤波器的倍频程和1/3倍频程分析
窄带频谱分析
AC/DC电压测量
电子信号频率测量
正弦信号和直流信号的产生
信号记录(信号的数字化值保存在设备的存储器中)
![$title]( "$title")
声振频谱分析仪ZET-038特点
大动态范围
记录和处理多通道数据
PTP同步
兼容ICP(IEPE),DeltaTron,ISOTRON传感器,
电隔离发电机
通道参数的可视化诊断
一键启动信号记录
多通道频谱分析仪017-U32规格参数
| Technical specifications |
| Analog input (ADC) |
| Number of analog inputs (voltage and ICP) |
32 |
| ADC resolution |
24 |
| Frequency ranges of the simultaneously analyzed signals |
DC…2, DC…20, DC…200, DC…2 000, DC…20 000 Hz |
| Maximal sampling frequency |
400 kHz |
| Antialiasing signals filtration |
up to 40 kHz |
| LPF filters are implemented as Butterworth filters 120 dB/oct for the following sampling frequencies: |
50 Hz, 500 Hz, 5 kHz, 50 kHz |
| Filters with frequency correction in compliance with IEC 61672-1:2002 |
А, В, С, D for 1-st class precision noise meters |
| Max. input voltage (amplification ratio=1) |
±10 V |
| Programmable amplification ratios |
1, 10, 100 |
| Analog output (DAC) |
| Number of analog outputs |
4 |
| Frequency range of the generated sinusoidal signal |
0,03… 20 000 Hz |
| Output resistance |
50 Ohm |
| Max. output current |
20 mA |
| DAC digit number |
16 |
| Max. output voltage value |
±10 V |
| Digital input/output |
| Digital input |
8 bit |
| Digital output |
8 bit |
| Digital input/output logic type |
TTL |
| Metrological specifications |
| Analog input (ADC) |
| Dynamic range |
110 dB |
| Channels non-linearity in the pass-band |
0,1 % |
| Cross-channel phase difference |
1° per 10 kHz |
| Intrinsic noise level of the entire pass-band at maximal amplification ratio applied to the input |
1 µV |
| Analog output (DAC) |
| Limit of relative admissible error of frequency for the range of 10… 20 000 Hz |
±0,1 % |
| Limit of relative admissible error of frequency for the range of 0,03…10 Hz |
±10 % |
| Limits of admissible error of output DC and AC |
±(0,2 % + 2 mV) |
| Harmonic ratio of the generated sinusoidal signal |
0,1 % |
| Operational specifications |
| Dimensions |
280 × 160 × 300 mm |
| Weight |
3,2 kg |
| Consumed power of a single module |
max. 500 VA |
| Types of supported transducers |
ICP (IEPE), DeltaTron, ISOTRON |
| Possibility of synchronization with other FFT Spectrum analyzers |
yes |
| Non-volatile memory volume (flash-drive)* |
up to 32 Gb |
| Sampling frequency of data recording to the flash-drive by a channel* |
50 kHz |
| Duration of data recording to the flash-drive by all the channels at maximal sampling frequency* |
10,8 hrs |
| Data rate via HighSpeed USB 2.0 |
480 Mbps |
| Data rate via Ethernet |
100 Mbps |
